| Glass Bedding Rifle. Pillar Bedding Process |
| Page: Instructions for glass bedding rifle. Pillar bedding method |
The first 2 photographs show the preparation rifle stock, and barreled action of Tikka M 550 rifle.
images/100_3330.JPG images/100_3331.JPG
Rifle stock and barreled action of Tikka M 550 prepared for glass bedding compound.
images/100_3334.JPGimages/100_3336.JPG
Pillar through rifle stock, clay is plugging holes and cavities, and magazine port of action, where bedding compound is not to flow.
images/100_3337.JPG images/100_3338.JPG
Barreled action and rifle stock fully prepaired for glass bedding. Next is putting release agent on all steel parts. Photo on left shows action already seated in stock with bedding compound.
images/100_3341.JPG images/100_3347.JPG
After 24 hours of hardening of bedding compound the barreled action is taken out of rifle stock. Looks fine.
images/100_3354.JPGimages/100_3352.JPG
Here, stock bedding surface on Tikka M 550 seen from above. Magazine on this rifle is more on the left side in walnut stock.
images/100_3358.JPGimages/100_3359.JPG
Rifle ready for assembly and testing. This is an accurate rifle now.
images/100_3360.JPGimages/100_3361.JPG
Picasa web album of glass bedding Tikka M 550
Rifle Bedding Book with more detailed instructions.
Rifle Bedding Book available on Tradebit.com
Glass BeddingTags: Instructions for glass bedding rifle pillar bedding method Pillar Bedding Tikka M 550 rifle glass bedding rifle rifle bedding
